Now offering 3,000 ton x 27.5' bed press braking!

Sales: 713-980-5800
Corporate: 713-453-3533

Structural Steel Processing


We have 9 horizontal band saws that offer cut-to-length production services for structural steel products, including beams, angle, channel, tubing, bar, flat bar, and tees. Material is moved via a transfer table to the powered conveyer system and then through the band saw for processing.

Cut-to-length capacity is up to 50” wide X 24” tall. Typical cut tolerance is +/- 1/16”.

Processed Structural Steel


Our 9 Spindle Beam Line is a CNC line equipped with a band saw, 3 drill spindles per each of the 3 axis, which operate at the same time, and a powered conveyer to mover the material before and after process.

Capacity: up to 50” wide and 24” tall and can drill up to 2” diameter holes

Processed Steel Beam


Our angle section bending machine with the ability to roll standard angle leg-out or leg in, flat bar on the flat or the edge, T’s stem-out, stem-in, or stem down, and square bar.


Angle Leg-Out 6” x 6” x 5/8” to 39 Ø
Angle Leg-In 5” x 5” x ½” to 47 Ø
T Stem-Out 6” x 6” x ½” to 47Ø
T Stem-In 5” x 5” x ½” to 67 Ø
T Stem-Down 6” x 6” x ½” to 51 Ø
Flat Bar on the Edge 6” x 1” to 39 Ø
Flat Bar on the Flat 10” x 1 1/2” to 39 Ø
Square Bar 3 ½” x 3 ½” to 47 Ø

Processed Steel Angle Roll

Angle Master

Our anglemaster is a CNC machine that punches round holes, slotted holes, and sheers angle to a specified length.


Maximum Angle Capacity 6" x 6" x 5/8"
Minimum Angle Capacity 1-1/2" x 1-1/2" x 1/8"
Maximum Flat Stock Capacity 6" x 5/8"
Minimum Flat Stock Capacity 2" x 1/4" OR 3" x 3/16"
Maximum Hole Size 1-1/4"

Processed Steel Angle

  Email Us